How to Smoke Double smoked ham, fully cooked: Time, Temperature and Wrap Point
Double smoked ham, fully cooked is a pork cut that runs about 0.35 hours per pound at 250°F and finishes at 165°F. Everything below comes from the same data the cook time calculator uses, so the numbers on this page and the numbers the tool gives you cannot disagree.
Double smoked ham, fully cooked at a glance
| Specification | Value |
|---|---|
| Category | Pork |
| Also called | Twice smoked ham, glazed ham |
| Typical purchase weight | 7 to 12 lb |
| Best grate temperature | 250°F |
| Cook rate | 0.35 h per lb at 250°F |
| Pull temperature (texture) | 165°F |
| Usable range | 140°F to 165°F |
| USDA safe minimum | 165°F |
| Rest before serving | 15 minutes |
| Expect a stall | No significant stall |
| Wood pairing | Apple, Cherry, Maple |
How long does it take to smoke double smoked ham, fully cooked?
This cut scales with weight, so the estimate is hours per pound at your chosen grate temperature. The table gives the mid-point estimate for the weights this cut is usually sold at. Real cooks land anywhere from 15 percent under to 25 percent over, which is why the calculator returns a window rather than a single time.
| Weight | 225°F | 250°F | 275°F |
|---|---|---|---|
| 7 lb | 2 h 48 m | 2 h 27 m | 2 h 06 m |
| 9.5 lb | 3 h 48 m | 3 h 19 m | 2 h 51 m |
| 12 lb | 4 h 48 m | 4 h 12 m | 3 h 36 m |
This is reheating, not cooking. USDA allows 140F only for ham repackaged in a USDA-inspected plant, so reheat everything else to 165F. Glaze in the last 30 minutes or the sugar burns. Add at least an hour of buffer to any plan longer than six hours. Finishing early is a solved problem, since a wrapped cut in a dry cooler packed with towels holds safely above 140°F for hours. Finishing late is not solvable.
What internal temperature should double smoked ham, fully cooked reach?
Cook it to 165°F, with a usable range of 140°F to 165°F. The USDA safe minimum internal temperature for this cut is 165°F . This is a doneness cook rather than a tenderness cook, so the number matters more here than it does on a brisket, and there is no long forgiving plateau to land in.
165F. USDA allows 140F only for ham repackaged in a USDA-inspected plant, so reheat everything else to 165F. Probe in the thickest part, away from bone and away from any fat seam. A probe sitting in fat reads high and will have you pulling early, which is the most common thermometer error in barbecue and the one that ruins the most expensive cuts.
When should you wrap it?
Optional. A loose foil tent stops the exterior drying while it comes up to temperature.
This cut does not stall in any meaningful way, so the temperature climbs steadily from start to finish. That makes it easier to schedule and much easier to overshoot, so start probing well before the low end of the window rather than at the end of it.
What wood should you use?
Good pairings for this cut are Apple, Cherry, Maple. The rule that matters is matching wood strength to meat strength: mild fruit woods for poultry, pork and fish, oak and hickory for beef, and mesquite only blended into something else because it turns bitter over a long cook. Wood changes flavour and colour, and it changes neither cook time nor safety. The wood flavour chart compares all ten common species side by side, and the wood pairing guide covers how much to use.
How do you buy and prep double smoked ham, fully cooked?
A spiral-sliced ham glazes beautifully but dries faster. A whole bone-in half ham holds moisture better.
The ham is already cooked, so this is reheating. Score, then glaze only in the last 30 minutes so the sugar does not burn.
The mistake to avoid: Glazing at the start. Sugar over three hours of heat turns black and bitter.
How much do you need to buy?
A 9 pound bone-in half ham feeds 12 to 15. Purchased weight and plated weight are not the same number and the gap is larger than most people expect, because trimming, bone, rendered fat and evaporated moisture all come off between the butcher counter and the table. Run your headcount through the meat yield calculator rather than guessing, and check the meat yield chart for the raw to finished ratios cut by cut.
How do you plan a double smoked ham, fully cooked cook backwards from dinner?
Forwards planning is how cooks end up serving at 9pm. Start from the hour you want to eat and subtract, using the slow end of the window rather than the middle, because a cook that finishes early is a solved problem and one that finishes late is not. Worked below for a 9.5 lb piece at 250°F and a 6pm service.
| Clock | Step | Hours before service |
|---|---|---|
| 12:51pm | Cooker lit and brought up to 250°F, wood loaded, probe ready | 5.2 h |
| 1:36pm | Meat on, probe in the thickest part away from bone and fat | 4.4 h |
| 5:05pm | Start probing. Do not wait for the estimate to run out before you check. | 0.9 h |
| 5:45pm | Off the cooker at 165°F, minimum 165°F confirmed | 0.3 h |
| 6:00pm | Served after a 15 minute rest | 0 h |
If it runs ahead of schedule, wrap it and hold it in a dry cooler packed with towels. That keeps it safely above 140°F for hours and on a collagen cut it genuinely improves the result. What it must never do is sit on a counter: every minute between 40°F and 140°F counts towards the 4 hour total, and that clock started when the meat left the refrigerator. Run your own weight through the cook time calculator for a schedule against your real serving hour.
How long should double smoked ham, fully cooked rest, and what is carryover?
Rest it for 15 minutes at minimum. Resting is not padding in the schedule, it is part of the cook: muscle fibres that contracted under heat relax and reabsorb liquid that would otherwise run out onto the board the moment you cut. On a large cut the difference between a fifteen minute rest and a proper one is visible as a puddle.
Carryover is the other half. A cut this size typically climbs another 10°F to 15°F after it leaves the heat, because the hot exterior keeps conducting inward until the whole piece equalises. On a doneness cook that matters a great deal: pull it 10 to 15 degrees below your finished target rather than at it, or the number on the plate will be higher than the number you aimed for. Note that carryover never counts towards a USDA minimum. Confirm 165°F with the thermometer before the meat comes off, not by predicting it will get there while it rests.
What size cooker do you need for double smoked ham, fully cooked?
Grate area is usually the binding constraint rather than cooker capability, and the rule that matters is airflow. Leave at least an inch of clear space around every piece so hot air can circulate. Crowded food steams rather than smokes, cooks unevenly, and produces pale patches where two pieces were touching. The smoker size calculator works out the grate area a specific headcount needs, and the complete setups match cookers to it.
Grate temperature is the other cooker question, and this cut runs best at 250°F. That is the practical default for most cookers: it removes roughly a fifth of the time a 225F cook takes at almost no cost in quality. The 225 versus 250 versus 275 comparison works through the trade in full.
How do you store and reheat leftover double smoked ham, fully cooked?
Cool it fast and shallow. Break large pieces down rather than refrigerating a whole roast: a hot mass in a deep container can sit in the danger zone for hours in the middle while the outside is already cold, which is the most common way good barbecue becomes unsafe barbecue. Get it into the refrigerator within 2 hours of coming off the cooker, or within an hour if the surrounding air is above 90°F.
Refrigerated at or below 40°F, cooked meat keeps for three to four days. Vacuum sealing and freezing is far better than a long refrigerator stay for anything you will not eat within that window. Reheat leftovers to 165°F, which is the USDA figure for reheated food regardless of what the cut's original target was. Reheating gently in a covered pan with a splash of liquid, or sealed in a bag in hot water, keeps far more moisture than a microwave does.
Other pork cuts worth smoking
Each has its own page with times at all three grate temperatures, a pull temperature, the wrap point, rest time and wood pairings.
| Cut | Typical weight | Best temp | Pull at | USDA min |
|---|---|---|---|---|
| Pork shoulder, Boston butt | 6 to 10 lb | 250°F | 203°F | 145°F |
| Pork picnic shoulder | 6 to 9 lb | 250°F | 203°F | 145°F |
| Pork spare ribs, St. Louis cut | 2.5 to 4 lb | 250°F | 200°F | 145°F |
| Pork baby back ribs | 1.5 to 2.5 lb | 250°F | 198°F | 145°F |
| Pork loin roast | 3 to 5 lb | 250°F | 145°F | 145°F |
Related tools and reading
- Cook time calculator: enter this cut, your weight and your grate temperature for a start time
- Internal temperature chart: USDA minimums and texture targets side by side
- Smoking time and temperature chart: every cut in one table
- Food safety for smoking: the danger zone and the 4 hour rule in full
- Best meat thermometers: the instrument every number here depends on
- All cuts: times and temperatures for every cut on the site